All Products : PhotoShip One Online Store, Camera Gimbals, RC Helicopters, RC Accessories

Displaying 1 to 10 (of 261 products)

1 2 3 4 5 ... [Next >>]


Add:	.250 x 1.250" Aluminum spacer w/ 4mm bore Model: PS1-250-1 spacer Price: $1.63
Used in Trex 600E FMTS and also as tilt axle for 2X gimbal.

Add:	.250" x .500" Aluminum spacer with 3.5mm bore Model: PS1-250-2 spacer Price: $1.25
Used as the spacer for the lower end of the shock when mounting FMTS to helicopter.

Add:	.250x.375x.125 Flange Bearing Model: Price: $6.75
This is the bearing used in the pan and tilt axis of the 2X & 3X Pro v2 gimbals. The 2X uses four of them. The 3X Pro v2 uses nine of them.

Add:	1.25" aluminum spacer 4-40 threads Model: Price: $1.89
4-40 threaded spacer 1.250" long. This spacer is used in the 2X gimbal. There are nine of them used in the 2X.

Add:	1/4" Aluminum Hub for Spur Gears Model: .250-Hub Price: $7.95
This is the aluminum hub that is our spur gears press on to. They come with a set screw. This part is used on the pan and tilt axis of the 2X and 3X ... more info

Add:	100 tooth 48 pitch gear - 3X Pro v2, v3 & 3X Pro HD Model: PS1-100t48p Price: $39.99
This is the gear that can be used for pan and tilt axis on 3X Pro v2, v3 and 3X Pro HD. 100 tooth, 48 pitch, .250" thickness. 6061 aluminum and ... more info

... more info Sold Out	105mm Spin Blades Asymmetrical Tail Blades Model: SB-105 Manufacturer: Spin Blades Price: $33.99
These blades are designed to be used in connection with Spin Blades asymmetrical rotor blades. Due to the low rpm required for operation of AP ... more info

... more info	15 tooth brass servo pinion Model: Price: $17.95
This is the pinion gear used on the servos for the 2X, 3X and VR Oblique gimbals. Specify Hitec or Futaba Splines (Futaba is used for Hyperion servos)

Add:	18 tooth brass servo pinion (Spektrum/JR splines) Model: Price: $24.95
This is the pinion gear used on the servos for the 3X Pro V2 gimbal when the Spektrum H6040 is installed. It is 18 tooth/48 pitch. Internal splines ... more info

Add:	20 tooth brass servo pinion (Futaba) Model: Price: $24.95
This is the pinion gear used on the servos for the 3X Pro V2 gimbal when the standard servos or Savox 1258TG servos are installed. It is 20 tooth/48 ... more info

Displaying 1 to 10 (of 261 products)

1 2 3 4 5 ... [Next >>]

Online Store

All Products

Categories

New Products [more]

Manufacturers

Information