Let's say you already own a 3X Pro or a 2X gimbal that you are using for another vehicle or project... and now you'd like to use the 3X Pro or 2X gimbal as a front mount on your RC Helicopter.


No problem!  You don't need to purchase an entire front mount package.  You only need to buy the FMTS.

In about 60 seconds you can attach your 2X or 3X Pro gimbal and now you have a 2XPT  or 3X Pro front mount.

The FMTS comes fully assembled with a hardened AN .250" pan axle and pan gear pre-installed. Just slip the gimbal onto the axle, tighten the nut and you're off!

Also included are the Lord mount vibration isolators for the rear of the tubes as well as the silicone oil dampers for the front of the tubes. 

The isolators the unit comes have a 4lb rating, meaning they work best at or near 4lb load applied.  For heavier camera gear you can purchase optional 8lb isolators to customize the level of damping to your needs.

This FMTS comes with heavy duty silicone oil shocks as standard.

Gaui X7 version of FMTS also includes the X7 conversion kit, Extended length landing gear, and batteyr boom mount.