News

They’ve done a great job shooting a Polo even in Dubai with their FlyLine cablecam system. Check it out!

Wow!  the crew at Antimedia used one of our FlyLine cablecam systems to catch this 500 meter long shot.  Amazing!  That’s 1/3 of a mile!  Well done!   500 meter cable cam from ANTIMEDIA on Vimeo.

We now have a direct bolt on camera mounting solution for the Align Trex 800 DFC Trekker. The mount system utilizes our three axis 3X Pro v2 or 3X Pro HD.  Full pan, tilt, and roll control. Is compatible with the Hoverfly Technologies electronic gimbal stabilizer. No modifications to the Trex 800 DFC airframe.  Direct bolt on in about 10 minutes. Purchase from our web shop today! http://photoshipone.com/shop/index.php?main_page=product_info&cPath=4_7&products_id=362

Watch as a 4kg (8.8lb) payload is flown with a CarbonCore Octo 1000mm multirotor system.   These CarbonCore systems are nothing short of amazing.

A project we’re working on.  A Gaui X7 with a DJI Zenmuse 3 axis camera gimbal secured to our FMTS front mount.  Will be interesting to see how well the video looks from this setup.

Thanks to Earl Douglas for shooting these great photos of our 3X Pro HD Mast prototype.  It’s shown in natural silver aluminum.  Production version will be satin black anodized.  This 3 axis gimbal is capable of handling up to 10lb of camera/lens with the ability to fully adjust the camera tray for proper balance.  Even with a large and heavy telephoto lens. We hope to have these ready for sale by end of July.

GAUI CRANE III IN STOCK AND READY TO SHIP! The Gaui Crane III camera gimbal is a two xis (tilt/roll) gimbal for use with multirotor copters.  The Crane III is able to fit cameras such as Sony NEX5N, Lumix LX5, GoPro, etc. The tilt and roll axis are gear reduction driven for smooth motion.  Servos are high resolution digital servos which offer fast precise control. GAUI 931001 Crane 3 Camera Gimbal Features: Suitable Model 330X-S, 500X 6061 CNC Metal 100% Full Carbon Fiber Frame Special engineered design provides more precise … read more →

Check out the May 2012 of AMA’s Model Aviation issue pages 101-103.  One of our customers is interviews by Model Aviation regarding his Trex 700E with our 2XPT gimbal system.  Cool!  

We have found on our DJI S800 Spreading Wings hexacopter that the header pins inside the red ESC RC signal distribution connector were loosely soldered.  We had a motor fail about 1 minute into running (just hovering, no damage thank goodness).  Inspection revealed the Gnd and Signal pins on the #6 motor connector were never properly soldered into the PCB.  You can see no evidence of solder on the pins.  If you peel back the ‘Controller’ sticker on the PCB you should notice the pins slightly protruding with sufficient solder.  … read more →

We’re engineering a landing gear/mounting conversion kit for the 3X Pro v2 to allow it to be mounted to a DJI Spreading Wings S800 hexacopter or CarbonCore airframes.  We utilized the factory S800 landing gear legs and supply the mounting brackets and hardware. CarbonCore frames will require that holes be drilled in the frame to mount the adapter. Vibration isolation of the plate is handled by four Lord platemounts. We’ve found them to work quite well in our helicopter applications. The mounting plate has various slotted holes for a variety of … read more →